Red Brick 4″

Red Brick 4 Inch

Product Highlights:

– Standard 4-inch red clay brick for general masonry applications.
– Suitable for residential, commercial and civil construction projects.
– Durable and easy to handle during construction.
– Suitable for partition walls and non-load-bearing masonry, subject to structural design.
– Available for bulk construction and project requirements.
– Commonly used by contractors, builders and civil construction professionals.

Product Description:

Red Brick 4 Inch is a commonly used clay brick for masonry and building construction applications. It is suitable for residential, commercial and infrastructure projects where standard brick masonry is required.

These bricks can be used for partition walls, internal walls and other suitable non-load-bearing masonry applications, depending on the project design and structural requirements. Their convenient size makes them easy to handle, align and install using standard masonry practices.

Engineer Mart supplies Red Brick 4 Inch for contractors, builders, developers and project sites. Bulk quantities can be supplied based on project requirements, availability and delivery location.

Technical Description (Quick Reference):

– Product Name: Red Brick 4 Inch
– Material: Fired Clay
– Type: Red Clay Brick
– Nominal Width: 4 Inch
– Form: Solid Masonry Unit
– Colour: Red / Reddish Brown
– Application: Brick Masonry
– Suitable Wall Type: Generally used for partition and non-load-bearing walls, subject to design
– Supply: Bulk / Project Quantity
– Packaging: Loose / As per supplier and transportation requirements

Note: Actual dimensions, compressive strength, water absorption and other technical parameters may vary by manufacturer and product grade. Confirm the applicable specifications before ordering for a specific project.

Recommended Use:

– Internal partition walls
– Non-load-bearing masonry
– Residential construction
– Commercial building construction
– General brick masonry
– Boundary and other suitable masonry works
– Building repair and renovation works

Installation Guide:

1. Ensure the bricks meet the project specifications before installation.
2. Soak the bricks in clean water before laying, as required by standard masonry practice.
3. Prepare the masonry mortar as per the approved project mix or site specification.
4. Lay bricks in proper alignment and maintain uniform joints.
5. Ensure adequate bonding between successive courses of brickwork.
6. Check line, level and verticality regularly during construction.
7. Cure the completed brickwork adequately as per the project specification.
8. Avoid using damaged or excessively cracked bricks in finished masonry.

FAQ:

1. What is a 4-inch red brick?

A 4-inch red brick is a fired clay masonry unit commonly used for partition and other general brickwork applications.

2. Where can 4-inch red bricks be used?

They are commonly used for internal partition walls, non-load-bearing masonry and general residential and commercial construction, subject to structural requirements.

3. Can 4-inch red bricks be used for load-bearing walls?

Load-bearing suitability depends on the brick’s strength, wall design and structural requirements. Always follow the structural engineer’s approved design and specifications.

4. Do red bricks need to be soaked before use?

Yes, clay bricks are generally wetted or soaked before laying to reduce excessive absorption of water from the mortar. The exact practice should follow the project specification.

5. Are 4-inch red bricks available in bulk?

Yes. Engineer Mart can cater to bulk and project-based requirements, subject to product availability and delivery location.